JLR APPROVED PRODUCTS
The new SSU2-50/S provides a stable voltage and up to 50 amps of fully regulated power to prevent loss of charge and damage to the battery without any fan noise ensuring a noise free environment for your sales customers.
SSU2-50/S can be used with any 12V automotive battery including AGM and GEL.
When the battery is charged the SSU is a regulated power supply to sustain accessory loads and offset parasitic drain.
This low profile (90mm) battery conditioner has been designed specifically for car showrooms.
Most conventional battery conditioners simply trickle charge the battery after it has been drained. The SSU2-50/S provides instant support to the battery negating the need for recharging.
With the SSU2-50/S showroom conditioner connected to your vehicles you can be sure that they are always ready for demonstration and that the battery will be kept in prime condition.
This unit has been designed to slip under most vehicles without scratching the floor surface and features automatic current sensing so that it knows when it is needed.
The intelligent sensing in SSU2-50/S determines exactly when support is required to minimize unnecessary noise and power consumption.
An expanding range of adapters are also available to allow simple connection directly to the vehicle battery or via distribution points.
Approved by JLR for use in showrooms.
DIAGNOSTICS, RE-PROGRAMMING, ABS BRAKE BLEEDING
BSU2-50 provides a stable voltage and up to 50 amps (dependent on model) of fully regulated power to prevent loss of charge and damage to the battery.
BSU2-50 can be used with any 12V automotive battery including AGM, GEL and Lithium Iron (LiFePO4).
When the battery is charged the BSU is a regulated power supply to sustain accessory loads and offset parasitic drain.
Can be used in the showroom to maintain the battery charge while power consuming accessories are being demonstrated without fear of power loss.
Reverse polarity protection.
Supplied with 4.8M lead set and 2.4M IEC power lead.
BSU2-50 - UK JLR Dealers click here
This low profile (90mm) battery conditioner has been designed specifically for car showrooms.
Most conventional battery conditioners simply trickle charge the battery after it has been drained. The SSU2-50 provides instant support to the battery negating the need for recharging.
With the SSU2-50 Showroom connected to your vehicles you can be sure that they are always ready for demonstration and that the battery will be kept in prime condition.
This unit has been designed to slip under most vehicles without risk of damage to floor and features automatic current sensing so that it knows when it is needed.
The intelligent sensing in the SSU2-50 determines exactly when support is required to minimize unnecessary noise and power consumption.
An expanding range of adaptors are also available to allow simple connection directly to the vehicle battery or via distribution points.
DIAGNOSTICS, RE-PROGRAMMING, ABS BRAKE BLEEDING
BSU2-125 provides a selectable stable voltage and up to 125A of fully regulated power to prevent loss of battery charge and damage to vehicle components.
BSU2-125 can be used with any 12v automotive battery.
When the battery is charged the BSU is a regulated power supply to sustain accessory loads and offset parasitic drain.
Can be used in the showroom to maintain the battery charge while power consuming accessories are being demonstrated without fear of power loss.
Reverse polarity protection.
Special Order Options: Integrated data logger24V 70A version
Also available as multiple output version BSU3.
DIAGNOSTICS, RE-PROGRAMMING, ABS BRAKE BLEEDING
BSU2-50 provides a stable voltage and up to 50 amps (dependent on model) of fully regulated power to prevent loss of charge and damage to the battery.
BSU2-50 can be used with any 12V automotive battery including AGM, GEL and lithium.
When the battery is charged the BSU is a regulated power supply to sustain accessory loads and offset parasitic drain.
Designed for use in the workshop and compatible with most diagnostic trolleys.
Reverse polarity protection.
Output current display.
Contactor reset for lithium batteries.
Supplied with IEC power lead and 5m output leads.
OVERVIEW
The MPL50-LI charger from Traction has been designed with the latest workshop standards in mind.
Suitable for most common battery types – LiFePO4, Ca/Ca, Ca/Ag, AGM, GEL and conventional lead acid.
The MPL50-LI features a contactor reset mode for reactivating disabled/highly discharged LiFePO4 batteries.
As with all Traction battery chargers the MPL50-LI is manufactured at our own UK site.
MPL50-LI is available with an optional temp sensing lead set allowing the ultimate in efficient charging.
MPL50-LI also features a 13.4V constant output mode for battery support functionality at up to 50A.
MPL50-LI is compatible with CDU-1 Charge Distribution Unit.